Renovation plans and construction drawings

Do you need a permit to renovate in Edmonton?

You need a permit to renovate in Edmonton when the work goes beyond surface finishes: structural changes, new or resized windows and exterior doors, finishing a bedroom, bathroom or living space, repairs after fire or flood, and most new electrical, plumbing, gas or heating work. Painting, replacing flooring, installing kitchen cabinets and replacing fixtures in the same location generally do not need one. The City of Edmonton sets the rules, and the permits are tied to the specific work rather than to the size of the project, so a small job can need a permit while a large cosmetic one may not. This guide explains the difference between development, building and trade permits, how the rules apply to kitchens, bathrooms and basements, and what happens once a permit is issued.

What the City of Edmonton says needs a permit

The City's page on renovations and basement development lists common projects that require permits:

  • Changing the exterior finish material of a house.
  • Adding a window or exterior door, or changing its size.
  • Building or finishing a living or recreation room, bedroom or bathroom.
  • Repairs due to fire or flood damage.
  • Changing an exterior wall to accommodate a new fireplace, such as a bump-out, cantilever or chimney chase.
  • Structural changes.

The same page lists maintenance and minor cosmetic work that does not need a permit:

  • Replacing flooring, painting and installing kitchen cabinets.
  • Replacing roof shingles.
  • Replacing windows with new ones of the same size.
  • Replacing the exterior finish of a house with similar materials.

The City is clear that a building permit is needed before construction begins, and that starting work without written permission can lead to stop work orders, fines or administrative penalties. If you are unsure, ask before the first wall comes down, not after.

Development permit vs building permit

Edmonton uses two different kinds of approval, and they answer different questions.

  • A development permit confirms that what you want to build is allowed under the Zoning Bylaw and fits its neighbourhood. It is about use and placement: what the space is for and where it sits on the lot.
  • Building and trade permits confirm that the construction itself is safe and meets the Alberta Safety Codes Act. They cover the structure, and the electrical, plumbing, gas and heating systems.

Most interior renovations in a house only involve building and trade permits. Development permits come into play when the use of the home or its footprint changes. The clearest example is adding a secondary suite: the City has a separate page on secondary suites, which explains that suites are typically allowed in zones where single detached, semi-detached, duplex or row houses are allowed, and how to check your property's zoning. Additions that add floor area also have their own rules. If your plans include a suite or an addition, confirm the zoning before you commit to a design.

Trade permits: electrical, plumbing, gas and heating

Trade permits are where many homeowners are caught out, because the work can look minor.

  • Electrical. The City's electrical permit page says a permit is needed to install, alter or add to an electrical system, including renovations, basement developments, hot tubs, garage wiring, EV charger installs, service upgrades and added circuits.
  • Plumbing. According to the City's plumbing permit page, installing or altering sinks, showers, toilets, water piping, drains and backflow prevention devices needs a permit. Replacing a fixture, or maintaining an existing system that stays in the same location, does not.
  • Gas and heating. New gas lines, a relocated gas range, a new gas fireplace or changes to heating and ductwork generally need permits as well.

When a project includes a building permit, the City asks that trade permits such as plumbing be included with it rather than applied for separately, unless the job is plumbing only.

How the rules apply room by room

Kitchens

New cabinets, counters, backsplash and flooring in the existing layout are cosmetic. Once you move the sink or dishwasher, add circuits for an island or new appliances, relocate a gas range or remove a wall, permits apply. Most kitchen renovations that change the layout involve at least electrical and plumbing permits, and a building permit if a wall is structural.

Bathrooms

Swapping a toilet, vanity or tap in the same spot is maintenance. Moving fixtures, building a new shower, adding circuits or heated floors, or creating a bathroom where there was none brings in permits. Our bathroom renovation projects usually fall into the second group, because the work worth paying for (drainage, waterproofing and ventilation) sits behind the tile.

Basements

Finishing a basement into a family room, bedroom or bathroom needs a building permit, plus trade permits for the wiring, plumbing and any heating changes. A basement development that includes a separate suite also needs the zoning check described above. Our Windermere basement project shows the kind of finished space this work produces.

Whole-home and exterior work

A full home renovation or addition will almost always involve several permits, often including structural review. New or larger windows, new exterior doors and changes to the exterior finish material are on the City's list as well.

Who applies: you or your contractor

Edmonton offers homeowner permits for some trade work, with limits. A homeowner electrical permit is only available for renovation work on a single-family home you own and live in, and you must do the work yourself; condos, rentals, and semi-detached and row housing units do not qualify. Homeowner plumbing permits are likewise limited to owner-occupied single detached houses where you do the work. Contractors applying for permits must hold a City of Edmonton contractor licence and a valid business licence.

In practice, when you hire a renovation company, the company should pull the permits for the work it is doing. Ask who will apply, and make it part of the written contract along with the scope, price and schedule.

Inspections are part of the permit

A permit is not just paperwork at the start. It comes with inspections at set stages, typically before walls are closed so the inspector can see the wiring, plumbing and framing. The City warns that missing a required inspection may mean removing finished walls, paying extra inspection costs and accepting delays. That is why inspections have to be built into the schedule, not added at the end. Our post on what no one tells you about renovations covers how these steps affect the pace of a project.

Outside Edmonton

If you live in St. Albert, Sherwood Park or another nearby community, your own municipality sets the permit requirements and processes. The general pattern is similar (structural, electrical, plumbing, gas and suite work need permits; cosmetic work usually does not), but forms, fees and timing differ, so check with your municipality before you plan the schedule.

How we handle permits

At Solenne, permits are part of the project rather than a task left to the homeowner. During the in-person estimate we identify which permits the work is likely to need, and we plan them and the inspections into the schedule before construction starts. If you are still at the planning stage, our guide to planning a home renovation in Edmonton covers budget, permits and the questions to ask any contractor.

Frequently asked questions

Do I need a permit to replace my kitchen cabinets in Edmonton?

No. The City of Edmonton lists installing kitchen cabinets, replacing flooring and painting as work that does not need a permit. If you also move plumbing, add circuits or remove a wall, those parts of the job do need permits.

Do I need a permit to renovate a bathroom?

Replacing a fixture in the same location does not need a plumbing permit. Moving fixtures, building a new shower, adding electrical circuits or finishing a new bathroom does. Most full bathroom renovations need at least one permit.

What is the difference between a development permit and a building permit?

A development permit confirms that a structure or use is allowed under the Zoning Bylaw. A building permit confirms the construction is safe and meets the Alberta Safety Codes Act. Many interior renovations need only building and trade permits.

What happens if I renovate without a permit?

The City says work started without written permission can lead to stop work orders, fines or administrative penalties. Unpermitted work can also mean opening finished walls for inspection later.

Plan the permits with the project

Permits are easiest when they are planned at the same time as the design. If you are thinking about a renovation and want to know what your project will involve, book a consultation with our team in west Edmonton and we will walk through the work and the permits it needs.